Samsung i9300 Flashing guide

Flashing Instructions:

- Unzip the file
- Open Odin 3.04 (already included in the firmware package)
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)



- Connect phone and wait until you get a blue sign in Odin



- Add I9300XXUFMB3_I9300OJKFMB3_HOME.tar.md5 to PDA- Make sure re-partition is NOT ticked- Start flash, sit back and wait a few minutes.






If you should encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!

Samsung S5670 Sucessfully Flashing Done With ODIN

Samsung S5670 Sucessfully Flashing Done With ODIN Naeem123e


1. Run Samsung S5670 Galaxy Fit Downloader > Odin.
2. Select OPS file: BENI_v1.0.ops
3. Click BOOT button and select: 4. APBOOT_S5670xxxxx_CL913243_REV01_user_low_true.tar .md5
5. Click Phone button and select: MODEM_S5670xxxxx_CL913243_REV01.tar.md5
6. Click PDA button and select: CODE_S5670xxxxx_CL913243_REV01_user_low_true.tar.m d5
7. Click CSC button and select: CSC_S5670xxxxxx_CL913243_REV01_user_low_true.tar.m d5
8. Put your phone into Download Mode: Press middle Key ( Home key ) + Power + Volume Down
9. Connect USB cable to your phone and the program must read the Com number it takes.
10. Click Start button and the update process will start.

Do not touch or remove anything till the device rebooted and you can see PASS word on the program.



Here Tested Flash File

DepositFiles