2690 contact service Hardware 100 Solution

Code:

DuckLoad.com  Easy streaming

Nokia 6350 latest flash files Free

Nokia 6350 RM-455 Version 13.17 latest flash files Free direct download only 3 files MCU,PPM,CNT just click on file for direct download 
1) MCU
2) PPM
3) CNT

Nokia 6760 Slide All Solution

Nokia Lumia 610 RM 849 schematic

Nokia Lumia 610 RM-849 schematic

Download

Nokia Lumia 610 RM-849 L3

Nokia Asha 203 On Off Power Button Jumper Ways

Nokia Nokia Asha 203 On Off Power Button Jumper Ways 100% Tested 

Nokia C2 01 keypad problem 100 tested solution

nokia c2-01 keypad problem
nokia c2-01 keypad ic jumper
nokia c2-01 keypad ic
nokia c2-01 keypad solution
nokia c2-01 keypad solution
nokia c2-01 keypad solution
nokia c2-01 keypad ic
nokia c2-01 keypad ic
nokia c2-01 keypad ic
nokia c2-01 keypad problem
nokia x2-01 keypad solution

In above diagram you can see some different colors these are set of inner and outer.each color shows a set of keys so if any of them is not working you can apply jumper with same color inner or outer

Samsung Galaxy S4 i9505 IMEI repair done! Guide inside 100 working

1. USB debuging on
2. Root manualy with CF-Auto-root (flashed via ODIN in PDA section)
3. *#7284# - set "UART" to PDA (Default is PDA)
4. *#0808# - set "USB" to AP (Default is AP) ,,,, set "USB settings" to DM+MODEM+ADB (Default is MTP)
5. *#9090# - select "[4]DM over UART(*)" ,,,, phone will reboot.
6. Connect phone with usb (install drivers if needed)
7. Select box comport in z3x
8. Repair button in z3x, fill IMEI.
Sony Xperia M C1905 User Guide Manual Free Download Now
Phone will check for root, write data, then it will reboot. After reboot connect phone with c3300k microUART rj45 cable (if its stuck on "Checking phone at COMxx..." then quickly *#9090# - "DM over UART", u should have enough time to reboot phone while z3x still searching on comport). z3x will write IMEI and reboot phone. All done!. Phone may search for network little bit longer but it will sign into network after while (max 2mins).

I was experiencing some troubles to get 3G working properly. However, after flash of firmware and wipe data and cache afterwards everything works as it should, expect that phone is searching for network one minute, max two (WEIRD).

LOG:

Code:

Selected model: I9505
Selected port: COM18 Z3X BOX Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: GT-I9505
Android version: 4.2.2
Product code: Not Active
Phone version: I9505XXUAMDM
PDA version: I9505XXUAMDM
CSC version: I9505OXXAMDB
IMEI: Unknown
Checking Super user right... true
Writing data to phone... OK
Rebooting phone... OK
Now connect phone to UART cable
Checking phone at COM18 OK
Reading phone info...
Model: GT-I9505
Country code: O2U
Cal date: -
Factory SW: I9505XXUAMDM
Unique number: CAF00D0198EE940
Memory phone: -
Bypass MSL... OK
Repairing IMEI... OK
Rebooting... OK
Repair done
Done with Samsung Tool v.14.9

G Five D18 NV File

---

Quote:

JWT_Z137B_304_PCB01_GPRS_MT6253_S00.L50MM02_9_52_1 _5T12M1110_M700.BIN

G-Five D18 NVM - 4shared.com - online file sharing and storage - download - omur faruk

Nokia C5 03 side key ways solution

Nokia C1 01 network problem solution jumper ways

Nokia C1-01 no signal, Nokia C1-01 not network, Nokia C1-01 low signal problem can be solve with these few steps that I am going to post in this post. So keep reading and look at the diagram bellow for network solution in Nokia C1-01.

To solve signal problem in Nokia C1-01 look at diagram above and in it you can find some parts that are identified with red lines, Clean these parts with electronics cleaner and apply some heat so that they can be dry.
Do nto apply much heat because it can harm your skin and may can damage the motherboard of Nokia C1-01.
Check antina points also in the housing (casing) and also apply jumper to short antina that is used for external antina attachment in Nokia C1-01.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Blackberry 8230 9220 9320 9780 9790 and Z10 schematic diagram

Blackberry schematics update :

Blackberry 99000 SCH + POP 39388-002 schema electric diagram

Quote:

Blackberry 9900_SCH + POP-39388-002.schematic _electric.part10.rar (380.9 KB, 36 views)Blackberry 9900_SCH + POP-39388-002.schematic _electric.part11.rar (380.9 KB, 38 views)

LGTOOL 1 80 SGTOOL 1 023 released support for more LG phones and big SAMSUNG update!

LGTOOL
by SEtool team

Version 1.80 released!

New version highlights:
Added full support for new LG phones.


SGTOOL
by SEtool team

Version 1.0.23 released!

New version highlights:
Added direct unlock for many new Samsung models, includes SGN2!
Many more other inprovements!


DIRECT DOWNLOAD LGTOOL & SGTOOL
DOWNLOAD LGTOOL & SGTOOL from RAPIDSHARE


New for LGTOOL direct services:

LG VM696 - World first

- Read/Write MEID,ESN
- Read Write Min1,Min2,Mcc,Mnc
- Read Write MDN
- Read/Write SID/NID
- Read/Write AKEY, OTKSL
- Read/Write SPC
- Read/Write PRL
- Dump/Flash NVM
- File explorer
- Flash Firmware (except VS840)
- Factory reset

LG LS840, VS840 World first

- Read/Write MEID,ESN
- Read Write Min1,Min2,Mcc,Mnc
- Read Write MDN
- Read/Write SID/NID
- Read/Write AKEY, OTKSL
- Read/Write SPC
- Read/Write PRL
- Dump/Flash NVM
- File explorer
- Flash Firmware (except VS840)
- Factory reset


New for SGTOOL module:

SAMSUNG S6500L, S5830C, B5510B

- Direct Unlock
- Repair IMEI

SAMSUNG A697, B3410W, C3510T, M3710, S3650, S3653, S3850, S5330, S5333, S7070, N7100 (Galaxy Note 2)

- Direct Unlock

SAMSUNG I9000, I9100, I9300, N7000, P5100, and many more

- SNR Repair

SAMSUNG SC02B

- Direct Unlock (*Need Root)

SAMSUNG B5512b

- Direct Unlock
- IMEI repair (Also Slave)


Other SGTOOL changes:

- Fixed IMEI Repair button not enabled on some models
- Add Extended Repair functions in BaseBand Repair Tool
- Updated Unlock Database for latest Omap/Qcom Unlocks



LGTool/SGTool Official Support Forum
LGTool Official Website

Samsung S3710 flash file

S3710ZCJK5

Blackberry Unlock codes rebuild imxx debrand Done!

Blackberry 9900 Read Codes Done!



Rebuild Imxx Done!



Debrand Done! (Logo remove)





 



Driver,


qc_hs_usb_drv.zip _________________

nokia C2 03 Ringer Problem Solution Jumper Ways

Nokia C2-03 ringer HF is not working, Nokia C2-03 Ringer Speaker is not working, Nokia C2-03 can not play music. We can not here voice during loud speaker in nokia c2-03.
Tools:-
Nokia key T4 and T5
Hot air.
Solding Iron.
Electronics Cleaner.
Nokia C2-03 Ringer,Nokia 2323 Classic Insert sim problem solution ways jumper

Diagnostic & Solutions:-
If Nokia C2-03 is not abble to ring a bell and we can not use loud speaker it might be fault of ringer or it may not be attached with mother board.
it can be damage or might be its not in proper location.It can be cause of Water damages and missing components,So lets solve the problem in a few simple steps as given in above diagram.
Disassemble Nokia C2-03 and check ringer points with electronics meter.If ringer shows good value then check point on the mother board and if the have also a good value it can be cause of miss fitting.
So assembly with proper placements and tight the screw and try it if not working then replace ringer with new one.If you find some prints missing then apply jumpers as given in above diagram. There are two different color lines Red and Blue.These lines indicates the negative and positive prints of ringer in Nokia C2-03 so apply these jumper to solve ringer problem in nokia C2-03
Warnings:-
Do not apply much heat with hot air it can damage the mother board and your skin.
Keep in mind about placement of ringer because it is not proper ringer will not work.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia Asha 300 Handsfree solution

nokia e5 00 mic problem jumper solution

microphone nokia e5 , nokia e5 microphone problem , nokia e5 mic not working solution , nokia e5-00 mic solution , nokia e5 mic ways , nokia e5 mic direction , nokia e5 mouthpiece solution , nokia e5-00 mic ways , nokia e5_oo mic ways , e5 mic solution , nokia e5 mic jumper , nokoia e5 mic problem solution ,Nokia Asha 200 Memory Ic solution here

nokia e5 mic problem , how to joint jumper for mic in nokia e5 , repair mic of nokia e5 , nokia e5 mic berisik , nokiae5-00micway, nokia E5 microphone solution, E5 Nokia mouthpiece repair, nokia E5-00 mouthpiece solution, How to repair or fix nokia e5 mouthpiece, nokia e5 mic jampar, nokia e5 00 mic solution, nokia

New All in One Schematic Blackberry 2012

---

Schematic Blackberry 2012 - Indowebster.com

Medusa Box v2 0 6 HTC Rhyme Desire X Dual and more!

Medusa Box v2.0.6 Release Notes:

- Added support for the following models:

• Pantech UM150VW - added Dead Boot/Device Repair.
• HTC Desire X Dual (T329W) - added Dead Boot Repair, Repair IMEI (A/B),
  Repair CID, Read Codes (thanks to Mr. Dr_Wolodya).
• HTC Rhyme (PI46100) - added Dead Boot Repair, Repair IMEI, Repair CID,
  Read Codes - all via USB cable and small TP.
• Huawei E303s-1 - added Dead Boot/Device Repair.

- Added support for new Сore ID (104200E1) for MSM8260 CPU.
- Added support for new Сore ID (200720E1) for MSM6800 CPU.
- All pinouts and Repair procedures are described in Software manuals ("Help" button in the Software).

More info and discussion are HERE

China keypad hang during call finally done it

No need to format your phone
No need to flash your phone
No need reset your phone
No need to heatup your cpu of phone.

just do as in the picture......

just connect the Extra Wire with Antina and you r done.

here is the picture.

This image has been resized. Click this bar to view the full image. The original image is sized 1600x1200.

Blackberry 9900 insert sim card 100 working solution

Blackberry 9900 insert sim card 100% working solution

How to Install Recovery on Huawei Ascend P1 U9200 B113 and B115

Huawei U9200 AKA Ascend P1

Try this at your own risk, I am NOT responsible if you brick your phone.

This is mainly for Huawei Ascend P1 U9200 with B113 or B115 firmware but will work on any version with the right recovery image :) 

 

Step 1 - Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:AndroidControl)

Step 2 - Download one of these Recovery images -
recovery-new.img (the one included in Onekey)
or
recovery-off.img (the one that Onekey is based on)
or
cwm_touch_recovery_viva_beta.img (A new one which is in English :)

Note: As far as I know, the first two are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around, the last one is a beta but is in English and uses the touchcreen to navigate rather than the volume and power keys :)

Step 3 - Put whichever image you choose into the AndroidControl folder ready to be flashed over.

Step 4 - Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.

Step 5 - Open a command prompt and navigate to your Android Control folder, run the following command depending which one you chose.


fastboot flash recovery recovery-new.img

or

fastboot flash recovery recovery-off.img


or



fastboot flash recovery cwm_touch_recovery_viva_beta.img


Step 6 -  Once finished type - fastboot reboot to reboot your phone.

Step 7 - Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery.

Enjoy :)

Nokia E51 lcd solution 100 tested

Nokia E51 lcd solution.

Nokia N95 lcd led solution

Samsung Advanced Rooting Software Version Root 1 7 3 download now and enjoy it

Samsung Advanced Rooting Software Version Root 1.7.3 download now and enjoy it

all Samsung mobile phone root easy software here see this software 100% working this software

try this step by step i hope solved your Samsung phone rotting problem 

BST SHOW THIS ERROR WHILE UNLOCK,REPAIR ETC...
YOU CAN ROOT THE PHONE WITH V ROOT



V Root 1.7.3 DOWNLAOD

Samsung s5360T unlocked done

18 pcs. of samsung galaxy y s5360 unlock by z3x no sweat .

Procedure:
1. update the unit first using this file( ROOT)
2.after update, open z3x tool then tick info.
3. tick unlock
4.automaticaly restart the phone and finaly put simcard the phone is unlocked already .

Symphony C102v Flash File

Symphony C102v (MTK-6252)








INFO - 01

ZL69PI44A_PCB01_GPRS_MT6252_S01.ZL69PI_44A0_V1_0_4 .BIN

Project ID : ZL69PI_44A0_V1_0_4

Password : Ashfaq Tawhid (Rayan)







INFO - 02

ZL69PI44A_PCB01_GPRS_MT6252_S01.ZL69PI_44A0_V1_0_3 .BIN

Project ID : ZL69PI_44A0_V1_0_3

Nokia X1 01 mmc solution

Blackberry unlocking procedure

1. INSTAL BLACKBERRY USB DRIVERS FROM THIS LINK:

Free File Hosting & Video Downloads, Free File Sharing, Online Friends Network - Ziddu

2.DOWNLOAD MEP READER TOOL:

Free File Hosting & Video Downloads, Free File Sharing, Online Friends Network - Ziddu

CONNECT HANDSET TO PC .

DRIVERS WILL AUTOMATIC INSTAL.

OPEN MEP READ TOOL.

IMEI AND MEP WILL SHOW....

IF U HAVE MXKEY SEE THIS LINK.

MX-key BLACKBERRY Procedure:

1 connect the BB unit thru mini usb

2 in connection click Blackberry then click connect

3 go to option double click blackberry tool

4 click scan

5 calculate code wait in seconds:

6 DONE......ENTER D MEP CODE..........

THATS DPOWER OF MX-KEY DONGLE!!!

How to enter MEP codes in BlackBerry:

1. Insert any sim card

2. Turn off all of the wireless connections

3. Go to Options

4. Select Advanced Options

5. Select SIM Card

6. Hit menu select show keyboard (where needed)

7. Type MEPPD or MEPD (you will not be able to see the typed info)

8. Enter MEP2 or MEPP2

9. Now it will say enter network mep code

now enter 16 digits mep2 code.unlock success.....

Asansam Box Ver 2 3 9 and All in One Rev 1 0 0 Released

Asansam Box Version 2.3.9


First In the World Again
And
Completely Separate
From
ASANSAM Team


Add RESTORE PB

GT-i9195L One Click Restore PB
GT-i9195T One Click Restore PB
GT-i9197 One Click Restore PB
GT-S7270 One Click Restore PB
GT-S7275 One Click Restore PB
GT-S7272 One Click Restore PB
GT-N9000 One Click Restore PB
GT-N9002 One Click Restore PB
GT-N9005 One Click Restore PB
GT-N9006 One Click Restore PB
SM-N900T One Click Restore PB
SM-N900P One Click Restore PB
SM-N900A One Click Restore PB
SM-N900V One Click Restore PB
SM-N900R4 One Click Restore PB
SM-N9008 One Click Restore PB
SM-N900J One Click Restore PB
SM-N900K One Click Restore PB
SM-N9009 One Click Restore PB
SM-N900S One Click Restore PB


About Restore PB
please read carefully before use this button = Risk
This option and Button is for only phones that startup is ok but when go to recovery mode show u E: failed to mount /efs (Invalid argument) or Not show EFS block in mount command
Please read manual before use this button
http://forum.gsmhosting.com/vbb/f716/warning-please-read-post-before-use-restore-pb-warning-1661676/


ALL IN ONE REV 1.0.0

Asansam box full setup(Asansam 2.3.9 and ASF 1.1.3)


About Asansam ALL IN ONE
Unistall and remove all about asansam and asf and
then install All in one

About support files server

ASANSAM Server Working now!!!
without any problem with high speed and Powerful

All thanks and Useless Posts after Release new updates Deleted

Download
============
ASANSAM_ALL-in-One_Rev1.0.0.exe
========================