Nokia C2 07 MMC Memory Card Problem Solution Ways

Nokia C2-07 MMC is not working or it do not accept memory card it can be cause of water damage and rust. It can be due to MMC jack and damage pins. And this problem can be reason of MMC I.C So lets check all these parts and try to Repair Memory card Problem in Nokia C2-07.Nokia 1280 Contact service & No Lcd light Solution


The above diagram have a red line to show you which parts are used in Memory Card function so check these parts and in first step try to clean them with electronics cleaner and apply some hot air to dry it.
Once it is dry check and if not working then replace this I.C to solve memory card problem in Nokia C2-07.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2 07 Lcd Display Problem Solution Ways Jumpers

Nokia C2-07 Blank Lcd Display, Nokia C2-07 White Lcd Display, Nokia C2-07 Lcd Jack Damage Prints Missing.
Tools:-
To solve lcd display problem in Nokia C2-07 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-07
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.nokia C1-01 Jumper solution for light problem


Diagnosting & Solution:
After disassemble of Nokia C2-07 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

nokia c2 00 light ways jumper solution display lights solution

Nokia C2-00 display light lcd light problem solution is available in this post a light repairing diagram is also attached with this post to solve nokia c2-00 lights problem lcd and display light problem dim lcd lights problem.nokia c1-02 light problem solution jumpers 100% Tested

In above diagram you can see some colorfull lines that are in red and blue colors. these lines are defining different tracks paths of components. these parts are used in light function in nokia c2-00.
check all these tracks with meter and if any of them is missing then apply these jumpers as given in above diagram to solve light problem solutions.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2 01 keypad problem 100 tested solution

nokia c2-01 keypad problem
nokia c2-01 keypad ic jumper
nokia c2-01 keypad ic
nokia c2-01 keypad solution
nokia c2-01 keypad solution
nokia c2-01 keypad solution
nokia c2-01 keypad ic
nokia c2-01 keypad ic
nokia c2-01 keypad ic
nokia c2-01 keypad problem
nokia x2-01 keypad solution

In above diagram you can see some different colors these are set of inner and outer.each color shows a set of keys so if any of them is not working you can apply jumper with same color inner or outer

nokia C2 03 Ringer Problem Solution Jumper Ways

Nokia C2-03 ringer HF is not working, Nokia C2-03 Ringer Speaker is not working, Nokia C2-03 can not play music. We can not here voice during loud speaker in nokia c2-03.
Tools:-
Nokia key T4 and T5
Hot air.
Solding Iron.
Electronics Cleaner.
Nokia C2-03 Ringer,Nokia 2323 Classic Insert sim problem solution ways jumper

Diagnostic & Solutions:-
If Nokia C2-03 is not abble to ring a bell and we can not use loud speaker it might be fault of ringer or it may not be attached with mother board.
it can be damage or might be its not in proper location.It can be cause of Water damages and missing components,So lets solve the problem in a few simple steps as given in above diagram.
Disassemble Nokia C2-03 and check ringer points with electronics meter.If ringer shows good value then check point on the mother board and if the have also a good value it can be cause of miss fitting.
So assembly with proper placements and tight the screw and try it if not working then replace ringer with new one.If you find some prints missing then apply jumpers as given in above diagram. There are two different color lines Red and Blue.These lines indicates the negative and positive prints of ringer in Nokia C2-03 so apply these jumper to solve ringer problem in nokia C2-03
Warnings:-
Do not apply much heat with hot air it can damage the mother board and your skin.
Keep in mind about placement of ringer because it is not proper ringer will not work.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

NOKIA C2 05 SIM IC JUMPER SOLUTION

Nokia C2 06 Ringer Problem Solution Jumper Ways

Nokia C2-06 ringer HF is not working, Nokia C2-06 Ringer Speaker is not working, Nokia C2-06 can not play music. We can not here voice during loud speaker in nokia c2-06.
Tools:-
Nokia key T4 and T5
Hot air.
Solding Iron.
Electronics Cleaner.
Nokia C2-06 Ringer,

Diagnostic & Solutions:-
If Nokia C2-06 is not abble to ring a bell and we can not use loud speaker it might be fault of ringer or it may not be attached with mother board.
it can be damage or might be its not in proper location.It can be cause of Water damages and missing components,So lets solve the problem in a few simple steps as given in above diagram.
Disassemble Nokia C2-06 and check ringer points with electronics meter.If ringer shows good value then check point on the mother board and if the have also a good value it can be cause of miss fitting.
So assembly with proper placements and tight the screw and try it if not working then replace ringer with new one.If you find some prints missing then apply jumpers as given in above diagram. There are two different color lines Red and Blue.These lines indicates the negative and positive prints of ringer in Nokia C2-06 so apply these jumper to solve ringer problem in nokia C2-06
Warnings:-
Do not apply much heat with hot air it can damage the mother board and your skin.
Keep in mind about placement of ringer because it is not proper ringer will not work.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia c2 00 no light solution

nokia c2 00 insert sim solution

Nokia c2 03 c2 06 c2 08 MIC microphone jumper ways solution

Nokia C2 03 charge not supported solution

Nokia C2 03 Charger Not Supported Problem Solution Ways

Plug in Charging pin into charging jack of Nokia C2-03 and if it shows an indication message Charger Not Supported it can be due to these few parts that are given bellow in diagram.So after disassemble of Nokia C2-03 clean these parts and area with electronics cleaner.nokia 101 insert sim problem jumper solution

Apply hot air and make it dry.Resold these parts indicated with red lines in above diagram to solve Charger Not Supported in Nokia C2-03
You can take these parts from other models of nokia also to solve charging problem in nokia C2-03
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.