Nokia Asha 202 Ringer problem solution ways

If you have ringer problem in nokia asha 202 you will not be able to hear music and ring tones will not ring properly in it. Low ringer voice in nokia asha 202 can be also due to water damages or broken parts. Damage components can be cause of no ringer voice in it.
nokia C5-03 touch screen problem solution jumpers

Replace the ringer and check if it is working good. Nosie in ringing can be due to ringer problem. Look at diagram above this diagram have some tracks to solve nokia asha 202 ringer problem solution.
A diagram that is attached with this post this diagram have two different color lines that are identifying tracks and parts that are used in ringer function of nokia asha 202.You can check all these components with meter and apply jumpers if any of them are missing or damage.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2 07 MMC Memory Card Problem Solution Ways

Nokia C2-07 MMC is not working or it do not accept memory card it can be cause of water damage and rust. It can be due to MMC jack and damage pins. And this problem can be reason of MMC I.C So lets check all these parts and try to Repair Memory card Problem in Nokia C2-07.Nokia 1280 Contact service & No Lcd light Solution


The above diagram have a red line to show you which parts are used in Memory Card function so check these parts and in first step try to clean them with electronics cleaner and apply some hot air to dry it.
Once it is dry check and if not working then replace this I.C to solve memory card problem in Nokia C2-07.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nony s208 Charging ways

Nokia C2 07 Lcd Display Problem Solution Ways Jumpers

Nokia C2-07 Blank Lcd Display, Nokia C2-07 White Lcd Display, Nokia C2-07 Lcd Jack Damage Prints Missing.
Tools:-
To solve lcd display problem in Nokia C2-07 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-07
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.nokia C1-01 Jumper solution for light problem


Diagnosting & Solution:
After disassemble of Nokia C2-07 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

nokia 101 sim ways

to solve nokia 101 insert sim problem you can read this diagram and follow these jumpers that are given in it.

NOKIA 5230 KEYPAD IC JUMPER KEYPAD SOLUTION

In the bellow diagram some differnet color lines are given these lines are the paths of sim points.
check these tracks with meter and if any of them is missing apply these jumpers to solve insert sim problem in nokia 101.
near the resistance you can find out some small points that can be scratch and apply jumpers on these points if resistance is missing.

nokia c2 00 light ways jumper solution display lights solution

Nokia C2-00 display light lcd light problem solution is available in this post a light repairing diagram is also attached with this post to solve nokia c2-00 lights problem lcd and display light problem dim lcd lights problem.nokia c1-02 light problem solution jumpers 100% Tested

In above diagram you can see some colorfull lines that are in red and blue colors. these lines are defining different tracks paths of components. these parts are used in light function in nokia c2-00.
check all these tracks with meter and if any of them is missing then apply these jumpers as given in above diagram to solve light problem solutions.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia Asha 203 On Off Power Button Jumper Ways

Nokia Nokia Asha 203 On Off Power Button Jumper Ways 100% Tested 

Nokia C5 03 side key ways solution

Nokia C1 01 network problem solution jumper ways

Nokia C1-01 no signal, Nokia C1-01 not network, Nokia C1-01 low signal problem can be solve with these few steps that I am going to post in this post. So keep reading and look at the diagram bellow for network solution in Nokia C1-01.

To solve signal problem in Nokia C1-01 look at diagram above and in it you can find some parts that are identified with red lines, Clean these parts with electronics cleaner and apply some heat so that they can be dry.
Do nto apply much heat because it can harm your skin and may can damage the motherboard of Nokia C1-01.
Check antina points also in the housing (casing) and also apply jumper to short antina that is used for external antina attachment in Nokia C1-01.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

nokia C2 03 Ringer Problem Solution Jumper Ways

Nokia C2-03 ringer HF is not working, Nokia C2-03 Ringer Speaker is not working, Nokia C2-03 can not play music. We can not here voice during loud speaker in nokia c2-03.
Tools:-
Nokia key T4 and T5
Hot air.
Solding Iron.
Electronics Cleaner.
Nokia C2-03 Ringer,Nokia 2323 Classic Insert sim problem solution ways jumper

Diagnostic & Solutions:-
If Nokia C2-03 is not abble to ring a bell and we can not use loud speaker it might be fault of ringer or it may not be attached with mother board.
it can be damage or might be its not in proper location.It can be cause of Water damages and missing components,So lets solve the problem in a few simple steps as given in above diagram.
Disassemble Nokia C2-03 and check ringer points with electronics meter.If ringer shows good value then check point on the mother board and if the have also a good value it can be cause of miss fitting.
So assembly with proper placements and tight the screw and try it if not working then replace ringer with new one.If you find some prints missing then apply jumpers as given in above diagram. There are two different color lines Red and Blue.These lines indicates the negative and positive prints of ringer in Nokia C2-03 so apply these jumper to solve ringer problem in nokia C2-03
Warnings:-
Do not apply much heat with hot air it can damage the mother board and your skin.
Keep in mind about placement of ringer because it is not proper ringer will not work.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Symphony z100 Mic Ways

Nokia C2 06 Ringer Problem Solution Jumper Ways

Nokia C2-06 ringer HF is not working, Nokia C2-06 Ringer Speaker is not working, Nokia C2-06 can not play music. We can not here voice during loud speaker in nokia c2-06.
Tools:-
Nokia key T4 and T5
Hot air.
Solding Iron.
Electronics Cleaner.
Nokia C2-06 Ringer,

Diagnostic & Solutions:-
If Nokia C2-06 is not abble to ring a bell and we can not use loud speaker it might be fault of ringer or it may not be attached with mother board.
it can be damage or might be its not in proper location.It can be cause of Water damages and missing components,So lets solve the problem in a few simple steps as given in above diagram.
Disassemble Nokia C2-06 and check ringer points with electronics meter.If ringer shows good value then check point on the mother board and if the have also a good value it can be cause of miss fitting.
So assembly with proper placements and tight the screw and try it if not working then replace ringer with new one.If you find some prints missing then apply jumpers as given in above diagram. There are two different color lines Red and Blue.These lines indicates the negative and positive prints of ringer in Nokia C2-06 so apply these jumper to solve ringer problem in nokia C2-06
Warnings:-
Do not apply much heat with hot air it can damage the mother board and your skin.
Keep in mind about placement of ringer because it is not proper ringer will not work.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia X2 02 Ringer problem solution ways

If you have ringer problem in Nokia X2-02 you will not be able to hear music and ring tones will not ring properly in it. Low ringer voice in Nokia X2-02 can be also due to water damages or broken parts. Damage components can be cause of no ringer voice in it.Nokia X2-05 Lcd Display Jumper Ways Problem Solution

Replace the ringer and check if it is working good. Nosie in ringing can be due to ringer pwoblem. Look at diagram above this diagram have some tracks to solve Nokia X2-02 ringer problem solution.
A diagram that is attached with this post this diagram have two different color lines that are identfing tracks and parts that are used in ringer function of Nokia X2-02.You can check all these components with meter and apply jumpers if any of them are missing or damage.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia E5 Display Light Jumper Ways

Troubleshooting hints on Nokia E5 LCD display light problem:
1. First try to replace the LCD screen display module.
2. Check the LCD pin connector, clean, re-solder it if necessary.
3. Check/read the VBAT voltage across the inductor coil, check the inductor coil too, replace if found damaged.
4. Trace the connection line paths of VLED-, VLED+ and the switching line.
5. Check/ replace the resistors near the LED driver IC.
6. Rehot, rework or replace the LED driver IC.

Nokia 500 ringer ways Solution

Blacberry 9900 USB ways tested solution

BB 9900 USB ways

Nokia c2 03 c2 06 c2 08 MIC microphone jumper ways solution

Nokia Asha 200 Ringer Problem Solution Ways Jumpers

Nokia Asha 200 Have two ringer and both of these ringer are shown in diagram all track and paths for two ringers are defined with different colors so look at the diagram given bellow and make these jumpers as Nokia C2-07 MMC Memory Card Problem Solution Ways
shown in diagram they will help you to solve ringer not working low voice or ringer problems in Nokia Asha 200.some parts have single leg ground while other is used for ringer path so if any of them have ground we have to jumper on the other side of that resistance or capacitor.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Nokia 5233 battery connector ways solution

Nokia 3110c Camera Operation Failed Ways Camera Not Working problem Jumper solution here

Nokia 3110c Camera Not Working,
Nokia 3110c Camera Operation Failed,
Nokia 3110c Camera Problem,
Nokia 3110c Camera Jumper
Nokia 3110c Camera Ways
Nokia 3110c Camera Solution,
Nokia 3110c