Nokia N8 Format Hard Reset to Factory Settings Procedures

Uploaded with ImageShack.us


This a simple instruction on how to factory reset the Nokia N8 and restores the phone to its original factory default settings.

Factory reset through Menu Settings, this is only a soft reset and it restores all data to factory default.

1. From Main Menu go to Settings
2. Select Phone
3. Select Phone Management
4. Select Factory Settings then Delete Data and Restore



Hard Reset



Uploaded with ImageShack.us


Hard Reset
Note: This will delete all your applications installed and you may need to install it back again after the hard reset has been made. This is only advisable if you have a screen problem errors like, hang or frozen problems. So proceed with precautions.

This is how to hard reset the Nokia N8 through button combination:

* Turn off the phone.
* Press and hold the following Button keys:
o Volume Down button
o Camera button
o Menu button
Press the Power button until the phone vibrates....


Once the process completes, the Nokia N8 will then reboot, any installed data or 3rd-party applications already wipe out. You may need to re-install it back again.

Nokia e52 dead due to shortage or water damages solution

If nokia e52 get dead due to water damages and it is short. To solve shortage in nokia e52 and solve nokia e52 shortage problem you can keep reading this post and look at the diagram given bellow in this post.

Once you have dis assembled the mobile phone. Make it clean with electronics and keep in mind all rust and carbon areas in the mother board. Clean all the mother board carefully and after cleaning apply hot air to make it dry.
In the diagram above you can find out some parts and components that you have to remove to solve nokia e52 shortage dead problem.Nokia e52 dead due to shortage can be solve with the help of this post and diagram that is given above.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

How to Install Recovery on Huawei Ascend P1 U9200 B113 and B115

Huawei U9200 AKA Ascend P1

Try this at your own risk, I am NOT responsible if you brick your phone.

This is mainly for Huawei Ascend P1 U9200 with B113 or B115 firmware but will work on any version with the right recovery image :) 

 

Step 1 - Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:AndroidControl)

Step 2 - Download one of these Recovery images -
recovery-new.img (the one included in Onekey)
or
recovery-off.img (the one that Onekey is based on)
or
cwm_touch_recovery_viva_beta.img (A new one which is in English :)

Note: As far as I know, the first two are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around, the last one is a beta but is in English and uses the touchcreen to navigate rather than the volume and power keys :)

Step 3 - Put whichever image you choose into the AndroidControl folder ready to be flashed over.

Step 4 - Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.

Step 5 - Open a command prompt and navigate to your Android Control folder, run the following command depending which one you chose.


fastboot flash recovery recovery-new.img

or

fastboot flash recovery recovery-off.img


or



fastboot flash recovery cwm_touch_recovery_viva_beta.img


Step 6 -  Once finished type - fastboot reboot to reboot your phone.

Step 7 - Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery.

Enjoy :)

Nexus S Firmware How to Update

Nexus S Firmware

This page gathers and collects all of the known stock Google firmware for the Samsung Nexus S. Which firmware you want depends on what device you have. To determine your device, check the sticker behind the battery.

Download Source Link  

How to Update:

Step 1: After downloading the update file

Step 2: Copy this file to the root directory of your Nexus S

Step 3: Power off your device

Step 4: Power your device on, while holding the Volume Up button, followed by Power button

Step 5: By using your volume keys for navigation, go to “Recovery” option and select using “power” button.

Step 6: You’ll see an exclamation mark on your screen. Hold the Power button followed by Volume up button

Step 7: From the Recovery menu, select the update from SD card option and browse to the update.zip that you have copied in step 2. Select the power button to confirm.

Kyocera ECHO M9300 Hard Reset to Factory Settings

These is the step by step procedures on how to hard reset the Kyocera M9300 ECHO  with Android OS, v2.2 (Froyo), 1GHz Scorpion processor, Qualcomm QSD 8650 Snapdragon.

Please note: Performing a factory reset is only advisable if you want to return back the phone to its original factory default settings and also fix some abnormal functions of the device.
Just make a back up copy of all your personal data before proceeding because the result of this process will delete all data you previously installed on the device.
This is a simple guide if you want to return the device to its original factory settings again.

Factory data reset of Kyocera M9300 ECHO:

1. On the main home screen, select menu
2. Select Settings, then Privacy
3. Select Factory data reset
4. Select Reset phone
5. Enter the password if prompted, then confirm by selecting Erase everything

Kyocera M9300 ECHO Hard reset, this may help if the phone experience some hang or frozen on some applications:

1. Turn the phones power off. Take the battery out from the device, wait a couple of seconds and reinsert it back again.
2. Now, Hold the Volume Down button
3. Then press and hold the Power button until the device turns on
4. A menu will show up like: Fastbook, Recovery, Clear Storage, and Simlock
5. Just select Clear Storage by pressing the Volume Down button
6. Then press and release the Power button
7. Select Volume Up if YES and Volume Down for NO

Once the reset process is complete, the phone will then reboot to its factory fresh state settings.
Any data including third-party applications previously stored from the Kyocera M9300 ECHO already wiped or deleted.

iphone and ipod touch disabled or to remove passcode w o restoring to itunes

---

1.download iphone browser here! http://www.mediafire.com/file/mfzgzmzjz55/SetupiPhoneBrowser.1.81.rar

2.install iphone browser

3.connect iphone to computer

4.open your iphone bowser and navigate to var folder

This image has been resized. Click this bar to view the full image. The original image is sized 759x632.

5.open var folder and navigate to keychains

This image has been resized. Click this bar to view the full image. The original image is sized 761x630.

6.open keychains folder and delete keychain-2.bd file

This image has been resized. Click this bar to view the full image. The original image is sized 758x633.

7.DONE!

8.reboot iphone passcode or disabled massage should be gone..

How To Register AvatorBox Step by Step

hi
AvatorBox User Here i Post Step by Step how to Reg Your Box.
if u have Activation Code or you Get Activation by eamil Avatorbox@Gmail.com









If you Again Face Any Problem for Registerion Box
Conect with me or post here your Problem. with Screen Short

Samsung Galaxy Round Everything You Would Want To Know

Samsung announced the Galaxy Round just two days back, the Flexible OLED technology was first introduced by Samsung at the CES 2013 in the month of January. Ever since then we have got rumors suggesting Samsung is to announce the curved display phone. The rumors came out to be true as Samsung did officially launch the Curved Display Smartphone, the Galaxy Round. The device is very much identical to Samsung’s latest Note, the Galaxy Note 3. The Galaxy Round has the same leather like stitching at the back of the device, and both the devices also share the same screen size, the difference is just the curve for the Galaxy Round.

The Galaxy Round is the first of its kind smartphone available in the market, for now the device is only available in Korea. However we assume that it should be available to all markets soon.

Features




Detailed Specifications:

The Samsung Galaxy Round has a 5.7 inch Full HD Super Flexible AMOLED display with a resolution of 1080 x 1920 pixels and 386 ppi. No doubt, the Korean company said such a curved screen smartphone is the first in the world. Moving further, the Galaxy Round is packed with a 3 GB of RAM along with a 32 GB of inbuilt storage which is expandable upto 64 GB via Micro SD card. The device has a 2800 mAh of battery, which is a bit low if compared to the 3200 mAh for the Galaxy Note 3.



Now, we all know all these specifications and features are amazing but what is the benefit of the curved display ? the company has not made it clear either, but we did see a video that showed the roll effect which showed the battery status and other notifications by just wobbling the device around. Samsung is introducing a new feature called “Round Interaction,” which will allow users to look at information such as missed calls, battery life, and the date and time when you tilt it on a flat surface with the screen off. Samsung also claims that switching between home screens will feel like one continuous transition, and has worked on new tilt- and tap-based interactions for the music and photos apps. The phone itself doesn’t flex, but the curved or smile shape makes it more comfortable to hold, Samsung says.

How to Install CyanogenMod 10 Android 4 1 Jelly Bean ROM on Samsung Galaxy S Duos S7562

In this tutorial we will guide you step-by-step on how to install CyanogenMod 10 Android 4.1 Jelly Bean ROM on Samsung Galaxy S Duos S7562.

CyanogenMod 10 Android v4.1 Jelly Bean provides an immense exhilaration to those users desiring to enjoy the features of Jelly Bean 4.1 ROM. CyanogenMod, also known as simply CM, is undoubtedly the most greatly acknowledged unauthorized Android firmware, and day-by-day they are increasing their compatibility with numerous old and freshly arriving Android devices from different manufacturers, including our Samsung Galaxy S Duos S7562. Many reviews show that CyanogenMod provides much more facilities than the official Android firmware. Installing CyanogenMod 10 Android 4.1 Jelly Bean on your Samsung Galaxy S Duos S7562 will enable its user to sustain in the Jelly Bean environment.

So in this tutorial we will be showing you an installation guide regarding using CyanogenMod 10 Jelly Bean 4.1 ROM on Samsung Galaxy S Duos S7562. Just follow the simple steps given below:

Disclaimer

This tutorial will definitely work when using Samsung Galaxy S Duos S7562 only. While working of it on others is not yet confirmed. On applying this installation to another model or device may give an unwanted result. While applying this update we will not be responsible if anything occurs to your device, so continue at your own risk.

Pre-Requisite

1. For successful completion of this rooting process charge your phone up to a minimum of 75% battery.
2. You must take a back-up of all your personnel items and other impotent data, such as Call Logs, SMS, Contacts, Audios, Images, Videos, APN (Access Point Names) settings, Bookmarks, MMS settings, on your phone.
3. One must install a custom recovery image particularly for his Android device. To do this, ClockworkMod Recovery should be downloaded using the Internet.
4. If you have not, then you must unlock your Android device’s Bootloader. But due to unlocking of Bootloader, your Android device may lose its official Warranty. So to overcome this, download fastboot from Internet.

Steps for installing CM10 Android 4.1 Jelly Bean ROM for Samsung Galaxy S Duos S7562

Step 1

From your Android device disconnect & remove the memory card and insert it in your Computer using a card reader. You must not use USB cable, since CyanogenMod do not work properly through USBs.

Step 2

Now do repartition of memory card, by just doing right click on the existing partition, choose Resize option, and then apply the sufficient amount of space towards your new partition. Make your new partition as your primary partition of Ext4 file system. Press the Apply option & remove your memory card now.

Step 3

Using the Internet, download: CM10 Android 4.1 Jelly Bean ROM for Samsung Galaxy S Duos S7562.zip file and Google Apps in your Computer. Again reinsert it in the PC and then copy the above downloaded zip file in a folder named as “root” under your SD Card. Don’t run or try to open this file, just copy it in the folder.

Step 4

Now, remove your memory card from the Computer. Then shut-down your Android smartphone and then again insert back memory card in the phone.

Step 5

Now, enter into the Recovery Mode. For this just press the Down Volume & Home button simultaneously, and while pressing these buttons press down your Power button at the same time.

Step 6

Since you are now in the Recovery Mode, select the “install zip from SD card” option, and then select the “choose zip from SD card” option to browse into your SD Card. Now, navigate up to the downloaded “CM10 Android 4.1 Jelly Bean ROM for Samsung Galaxy S Duos S7562.zip” file for flashing it on your phone.

Step 7

Now get yourself back to the main menu by pressing back button and then reboot your Android phone.

Step 8

After this, you’ll have CyanogenMod 10 ROM installed over your Samsung Galaxy S Duos S7562.

Finished!

————————————————————————————————————————————————–

Update: The link for downloading CyanogenMod 10 ROM has been removed from this tutorial as it had become a ‘dead link’  after sometime(as reported by many of our site readers!). Keep checking back our site as we will soon be updating the new working link for downloading the ROM.

How to Restore stock Firmware on Huawei Ascend P1 U9200

Huawei Ascend P1 - U9200

WARNING - This will completely reset your phone and erase all data, custom rom and any custom recovery partition you have installed such as ClockWorkMod and replace it with Huawei Stock recovery etc. It will also remove any rooting on the phone and restore it to its unrooted state.

Method 1 – Forced Update

Step 1 - BACKUP everything on your phone.

Step 2 - Download the stock firmware

• Huawei Ascend P1 U9200 - Firmware List

(These are the only ones I have available at the moment so you might need to pick the closest match for yours)

* - This may or may not be the correct country, Ive had to guess with some of the firmwares so if not it will probably be close or a general/normal version.

Step 3 – Download all parts of the firmware into the same folder.

Step 4 - Open one of the downloaded .rar files in WinRAR or other archive manager.

Step 5 - Select the dload folder inside the main folder and drag it onto your desktop.

Step 6 - Open the dload folder on your desktop and check that the file update.app is inside.

Step 7 - Copy the whole dload folder accross to the root of your phones SD card (you may want to use a blank SD for this)

Step 8 - Turn your phone off then press and hold the volume up and volume down keys together and then press the power key.

Step 9 - The install process should start automatically so just wait until its finished.

 

Step 10 - Your phone will reboot automatically after the firmware has finished installing and will take some time to load, this is normal so just leave it to do its thing.

Step 11 – Check that the update has worked by checking the Firmware version by navigating to - Setting->About phone->Build number

Note: The [Firmware Version] should match the last 7 characters of the firmware you downloaded eg C00B213.

Method 2 – Normal Update

Step 1 - BACKUP everything on your phone, I cannot stress this enough :)

Step 2 - Download the stock firmware

• Huawei Ascend P1 U9200 - Firmware List

(These are the only ones I have available at the moment so you might need to pick the closest match for yours)

* - This may or may not be the correct country, Ive had to guess with some of the firmwares so if not it will probably be close or a general/normal version.

Step 3 – Download all parts of the firmware into the same folder.

Step 4 - Open one of the downloaded .rar files in WinRAR or other archive manager.

Step 5 - Select the dload folder inside the main folder and drag it onto your desktop.

Step 6 - Open the dload folder on your desktop and check that the file update.app is inside.

Step 7 - Copy the whole dload folder accross to the root of your phones SD card (you may want to use a blank SD for this)

Step 8– If your phone is on, switch it off and then back on again. Otherwise switch on your phone and wait for it to boot up fully. Navigate to Settings->Storage->Software Upgrade->SD card Upgrade->Confirm->Upgrade

You should then see the following - 
 

Step 9 – Check that the update has worked by checking the Firmware version by navigating to - Setting->About phone->Build number

Note: The [Firmware Version] should match the last 7 characters of the firmware you downloaded eg C00B213.

Done, you should now have a phone thats back to factory fresh :)

Walton Primo H2 Flashtool Firmware driver UPDATE to Android 4 2 2 Jellybean

Release Note:
1> Update OS from 4.2.1 to 4.2.2
2> Minor bug fixing
3> More battery stand by time
4> Overall performance is more smooth, faster than previous



1.Install driver:

1st step: Power Off the phone and  Connect your phone with PC via USB cable. Now go to My Computer>Manage> Other devices> MT65xx Preloader



2nd step: A window will appear like below and select Browse my computer for driver software



3rd step: To select driver go to driver folder> USB VCOM Driver> Win7





4th step: Windows security window will appear. Select Install this driver software anyway



5th step: Wait until Windows has successfully updated your driver software



6th step: Now go to Driver Folder> Open MS_USB_ComPort_Driver_exe_v1.1032.1 > Install Driver





2.Open Flash Tool



3.Open  Download Agent and select MTK_AllinOne_DA


  
4. Open scatter_loading and select SW---> Software-> Primo_H2_V4.3_2013-05-29 MT6589_Android_scatter_emmc.txt



5. Click  Download and connect USB with mobile (without battery)

6.When it shows Download ok in green, the installation is completed.



Download firmware (Android 4.2.2 for H2):- http://www.mediafire.com/?jarb746xdqlapre

Download Flashtools & drivers :- http://www.mediafire.com/?d2exw8b0fdgrb8r

Dont waste Time To Searching Volcano Can Do All Android Root

dont need to waste time for searching manual root files

samsung GT-S6010 auto root failed 4.0.4

rooted with volcano then unlocked easily

if you have volcano you have more time for more customers





auto root failed






used volcano for root






rooted then unlocked in seconds